How To Remove Mold From The Floor And Walls Safely And Efficiently

Mold on the floors and walls not only affect the aesthetic of the house but also have an impact on human health. So, how to remove these stains? Let’s find the answers to EGS in the article below.

What are molds and why do they appear?

Mold appears as tiny black spots on bathroom walls and floors. It forms and grows in response to water and reproduction processes. There are numerous causes of mold growth on floors and walls, including:

• The floors and walls are frequently damp, and this location is situated in a humid climate zone.
• The construction method and mixture ratio are flawed. Using low-quality materials and no water-resistant paint.
• Leaking pipes.
• The waterproofing system is failing.

The harmful effect of mold

It is very small, but its impact on life and activities is significant, as follows: 

Impact on health

In addition to being irritating like dust, molds also cause respiratory diseases. According to research conducted at Western Sydney University, molds can cause asthma, particularly in children. Mold-contaminated air is inhaled by individuals with compromised immune systems, causing the formation of mucus in the lungs, respiratory disorders, chronic pneumonia, and infections. Similarly, consuming mold-contaminated food will result in symptoms such as abdominal pain, headache, vomiting, etc.

Molds can cause asthma and other diseases

Impact on aesthetics

Mold is one of the factors that have a direct impact on the aesthetics of a home. It will make your house decrepit and ugly. Mold also damages other things in the house if it isn't dealt with quickly and thoroughly. 

Mold directly impacts the aesthetics of a home

Tips to remove mold on walls and floors

Javel

This method is effective for removing mold from walls and floors using Javel, one of the most well-known and widely used laundry detergents. Dilute the javelin with water in a ratio of 1:2, then roll it over the moldy area and scrub it with the brush. After completion, rinse the wall or floor with clean water and allow it to dry naturally. When using chemicals, it is important to remember to open all doors to eliminate the smell of javelin.

>>> Read more: Principles For The Safe Use Of Cleaning Chemicals

Javel

Lemon

Lemon's constituents contain a significant amount of citric acid, resulting in a powerful cleansing effect. Rub lemon on the moldy areas, then vigorously scrub them with a brush. Finally, dry the walls and floors with a clean towel.

Lemon

Vinegar and baking soda

The combination of vinegar and baking soda is one of the most effective methods of removing mold from walls and floors. Using a brush, scrub the moldy area with a mixture of baking soda and vinegar, wait 10–15 minutes, and then rinse with clean water.

Soap

Soap can be used to treat mold in areas where it is not excessively prevalent. Dilute soap with water in a ratio of 1:3, absorb the solution with a brush, and apply it to the moldy area. Then, thoroughly rinse with clean water.

Using soap to remove mold

Hydrogen peroxide

Utilize a 3% pure solution of hydrogen peroxide and spray it directly on the plaque. To completely remove mold stains, allow the solution to penetrate the surface for approximately 10 minutes before drying with a clean towel.

Borax

As a natural cleaner, it eliminates all stains without causing any negative side effects. Simply combine borax and water in a ratio of 1:3, scrub the mold with a brush, and rinse with clean water.

GMP Cocorex Mold & Mildew Remover

Cocorex Mold & Mildew Remover is the solution to your tough and stubborn stains in your bathroom and other home surfaces. It is with Japan formulation that easily removes stubborn stains thoroughly in one easy spray:

• Spray directly onto the surface to be cleaned.
• Use a clean rag to wipe the surface that has been sprayed with chemicals until the stain, moss, and mold are removed.
• There is no need to rinse with water (unless the surface often comes in contact with food, or is in contact with children or pets), as residual chemicals will help inhibit mold growth in the future.

GMP Cocorex Mold & Mildew Remover

EGS is proud to be the exclusive supplier of Goodmaid Pro product lines in Vietnam, the leading brand of consumer chemicals in Malaysia. All Goodmaid Pro product lines are ISO 9001 QMS certified and strictly controlled from fabrication to finished products. Providing high-quality cleaning chemical solutions to the Vietnamese market's diverse needs.

—-----------------------------------

Contact information

EGS

Address: 5 Floor, Song Do Tower, 62A Pham Ngoc Thach, Vo Thi Sau Ward, District 3, HCMC.

Hotline: 0908 061 427

Facebook: www.facebook.com/egs.vn.EcoGreentechSolution 

LinkedIn:  https://www.linkedin.com/company/eco-greentech-solution/